Metra Line Output Converter Wiring Diagram

Are you looking for metra line output converter wiring diagram? You can get the metra line output converter wiring diagram here, so that you can easily install it.

To obtain the wiring diagram for the metra line output converter, you can follow the link to download it. With this diagram, it will be much easier for you to install the converter.

2 Channel Line Output Converter Wiring Diagram (AX-ALOC700)

metra line output converter wiring diagram

This easy-to-use and portable line output converter will allow you to install an amplifier without re-wireing it when using an OEM radio with short-circuit protection. It features a new molded design and is extremely easy to install.

Features:

  • 80-watt maximum input
  • Compatible with OEM radios that have short circuit protection (i.e., radios that sense resistance loads)
  • 2 channel output
  • Separate level adjustment for each channel

Wire Colors

ColorInput Harness
WhiteLEFT Front (+) Input
White/BlackLEFT Front (-) Input
GrayRIGHT Front (+) Input
Gray/BlackRIGHT Front (-) Input
BlackReference Ground (-)
Reference ground optional if noise is present.

2 Channel Fixed Line Output Converter Wiring Diagram (AX-ALOC10)

metra line output converter wiring diagram ax aloc10

The Ax-ALOC10 is a speaker-level audio converter that converts audio to line-level. It can be used to install various products such as crossovers, amplifiers, and EQs that don’t have RCA line-level outputs.

Features:

  • a maximum input power of 30 watts.
  • 2 channel input.
  • Fixed level.
  • Stepdown is fixed at 6:1.
  • Gold Flashed RCAs
  • Molded channels prevent zip ties from slipping control between amplifiers.

Wire Colors and Function

ColorInput Harness
WhiteLEFT Front (+) Input
White/BlackLEFT Front (-) Input
GrayRIGHT Front (+) Input
Gray/BlackRIGHT Front (-) Input
BlackReference Ground (-)
Reference ground optional if noise is present. the audio and power input wire colors adhere to the EIA standard.

Make sure that the audio connections are in phase with one another and polarized. Doing so will prevent low-quality audio and poor bass response. The positive and negative wires of the Ax-ALOC10 should also be connected to each other.

4 Channel Adjustable Line Output Converter Wiring Diagram (AX-ALOC648)

metra line output converter wiring diagram ax aloc648
metra line output converter wiring diagram ax aloc648

The AX-ALOC648 can convert up to four channels of audio to line-level using a standard stereo head. It can be used to install various products such as crossovers, amplifiers, and EQs that don’t have RCA line-level outputs.

Features:

  • Maximum input of 80 Watts.
  • Crossover distortion is corrected by the input circuit, which is not the case with other brands of locs.
  • 6:1 reduction ratio with variable output.
  • detachable input plug.
  • The rcas flashed gold.
  • beautiful & durable enclosure.

Wire Color and Function

ColorInput Harness
WhiteLEFT Front (+) Input
White/BlackLEFT Front (-) Input
GrayRIGHT Front (+) Input
Gray/BlackRIGHT Front (-) Input
GreenLEFT Rear (+) Input
Green/BlackLEFT rear (-) Input
PurpleRIGHT Rear (+) Input
Purple/BlackRIGHT Rear (-) Input
BlackReference Ground (-)
Reference ground optional if noise is present.

The polarity of the audio connections should be in phase with one another. The positive and negative wires of the Ax-ALOC648 should be connected to each other. Doing so will prevent low-quality audio and poor bass response.

Adjusting the AX-ALOC648 for maximum performance

For maximum performance, the Ax-ALOC648 should be adjusted by rotating its adjustment pots clockwise. After all of the connections have been completed, turn the switch on the stereo system and adjust the volume control to 3/4.

After the adjustment pots have been selected, turn them slowly and carefully around until they are at the same position. Turn the other adjustment pot around to the same position. The Ax-ALOC648’s audio set-up is now complete.

2 Channel Line Level Converter Wire Color (AX-ALOC608)

The AX-ALOC608 is built to change audio from speaker level to line level. This makes it possible to install line-level products like amplifiers, equalizers, and crossovers on systems that don’t have RCA line-level outputs.

Wire Color

ColorInput Harness
WhiteLEFT Front (+) Input
White/BlackLEFT Front (-) Input
GrayRIGHT Front (+) Input
Gray/BlackRIGHT Front (-) Input
BlackReference Ground (-)
Reference ground optional if noise is present.

NOTE: Make sure that all of the connections for the audio input are polarized or in phase with each other. That is, the audio source’s positive output wires need to be connected to the AX-positive ALOC608’s input wires. The negative audio wires are the same. If you don’t do this, the bass response will be bad and the sound quality will be bad.

Features:

  • Maximum input of 80 watts.
  • Input Circuit Corrects Crossover Distortion Commonly Observed On Competing LOC Brands
  • Step-Down 6:1 with Variable Output.
  • Detachable Input Plug.
  • Gold flashed RCAs
  • Attractive & Durable Enclosure.

Setting up the AX-ALOC608 for the best performance

After you’ve made all the connections you need to, turn the AX-ALOC608 adjustment pots all the way down by turning them counter-clockwise. Now, turn on the stereo system and set the main volume control to about 3/4 of the loudest setting.

Choose one of the AX-adjustment ALOC608’s pots and slowly turn it clockwise until you hear audio distortion, then stop. Turn the other pot so that it is in the same place as the first pot. The AX-audio ALOC608’s setup is now done and it’s ready to be used.